項目描述:模擬紅外探測器生成圖像的各種效應,比如非均勻性,大氣衰減等
項目職責:對其中的噪聲處理板和主板進行充電控制系統設計,從芯片選型到原理圖設計到PCB繪制以及後期調試,實現了觸摸屏控制手動和自動的鋰電池充電功能
開發工具:keil uvision4,Altium Designerv8 winter09
項目名稱2:圖像分割
項目描述:視頻輸入信號經過解碼芯片解碼後采集,進行分割壓縮處理,後端顯示
項目職責:視頻編碼芯片saa7121的配置工作,實現編碼芯片的正常輸出
開發工具:QuatusII,modelsim
項目名稱3:非均勻性校正 項目描述:為導引頭探測器成像系統提供非均勻校正,把參數返回給導引頭 項目職責:USB通信調試和Flash芯片sst25vf010配置工作,實現了USB芯片cy68013正常傳輸和FPGA數據參數的Flash讀寫開發工具;keil uvision4
項目名稱4:液體變焦鏡頭驅動
項目描述:對液體鏡頭進行驅動電路設計,對比手冊數據進行分析,為以後液體鏡頭圖像采集及其三維立體顯示研究做準備項目職責:液體變焦鏡頭驅動電路原理圖設計到PCB繪制,程序編寫及調試,完成了驅動電路板設計,實現了手動液體鏡頭調焦並進行了數據分析對比
翻譯後:Project name 1: multi-spectral simulator project
Project Description: Analog infrared detector to generate images of various effects, such as non-uniformity, atmospheric attenuation
Project responsibilities: the noise of which deal with board and board charge control system design, selection from the chip to draw the schematic design to PCB and post-commissioning to achieve a touch-screen control manual and automatic battery charging function
Development tools: keil uvision4, Altium Designerv8 winter09
?
Project Name 2: Image Segmentation
Project Description: The video input signal through the decoder chip decoding acquisition, segmentation compression, back-end display
Project responsibilities: video encoder chip saa7121 configuration work, the normal output encoding chips
Development tools: QuatusII, modelsim
?
? Project Name 3: non-uniformity correction
? Project Description: seeker detector imaging system for the provision of non-uniformity correction, the parameters returned to the seeker
? Project responsibilities: USB communication debugging and Flash chip sst25vf010 configuration, providing a USB chip cy68013 normal transmission parameters of the Flash and the FPGA to read and write data
Development tools; keil uvision4
?
Project name 4: liquid lens driver
? Project Description: The liquid lens driver circuit design, compared to manual data analysis, the liquid lens for the future three-dimensional image acquisition and display of preparation
Project responsibilities: liquid lens driver circuit schematic design to PCB drawing, programming and debugging, finished the drive circuit board design, implementation, and a manual focus liquid lens for the data analysis and comparison.